AD8370AREZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 200Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8370 |
| Pin Count | 16 |
| Output Type | Differential |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 79mA |
| Power Dissipation | 575mW |
| Slew Rate | 5750V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 400pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Bandwidth | 750 kHz |
| Gain Bandwidth Product | 750MHz |
| Voltage Gain | 34dB |
| Gain | 34 dB |
| Noise Figure | 7.4 dB |
| Nominal Supply Voltage (DC) | 5.5V |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8370AREZ-RL7 Overview
In order to protect the op amps, a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad case is used. The instrumentation amplifier in this picture is of the Variable Gain-type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 16. In this case, there are 16 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Other Analog ICs. 16 pins are located on the operational amplifiers. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 79mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 34dB for the time being. On this buffer amplifier, there are 1 circuits. In addition to outputting Differential signals, this op amp ic offers a number of other advantages. There are a total of 2 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage. It is recommended to keep the instrumentation amplifier resistance within the range of 200Ohm. An analog IC that is also used in this instrumentation amplifier is referred to as the ANALOG CIRCUIT type.
AD8370AREZ-RL7 Features
16 Pins
supply voltage of 5V
34dB voltage gain
Output Type: Differential
Resistance of 200Ohm
AD8370AREZ-RL7 Applications
There are a lot of Analog Devices Inc. AD8370AREZ-RL7 Instrumentational OP Amps applications.
- Signal operation
- Exponential operation circuits
- High gain DC amplifier
- Test equipment
- Weighing systems
- Computer workstations
- Comparator
- Video amplifiers
- Image computer boards
- Broadcasting
