AD8397ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8397 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 11mA |
| Quiescent Current | 11mA |
| Supply Current-Max | 30mA |
| Slew Rate | 53V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 96 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 3V~24V ±1.5V~12V |
| Output Current per Channel | 310mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 35MHz |
| Neg Supply Voltage-Nom (Vsup) | -12V |
| Unity Gain BW-Nom | 14000 kHz |
| Voltage Gain | 90dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 69MHz |
| Bias Current-Max (IIB) @25C | 0.9μA |
| Programmable Power | NO |
| Input Capacitance | 1.4pF |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8397ARZ-REEL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Voltage Feedback-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 12V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. An 8-pin op amp ic is included in the package. There is an input offset voltage of 3mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 11mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 90dB is the best course of action. There are 2 channels on the operational amplifiers. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The instrumentation amplifier is packed in the form of TAPE AND REEL. The current is quiescent at 11mA.
AD8397ARZ-REEL Features
8 Pins
supply voltage of 12V
90dB voltage gain
Output Type: Rail-to-Rail
AD8397ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8397ARZ-REEL Instrumentational OP Amps applications.
- Proportional operation circuits
- High gain DC amplifier
- Subtraction operation circuits
- High/low-pass filter circuit
- Biopotential
- Fast A/D and D/A converters
- Fission chambers
- Strain gauges
- Power generator
- High-frequency data acquisition systems
