AD8418BRMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | DMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8418 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 2.6mA |
| Nominal Supply Current | 2.6mA |
| Max Supply Current | 130μA |
| Slew Rate | 1V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 250 kHz |
| Voltage Gain | 26.02dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Capacitance | 2pF |
| Input Voltage Noise Density | 110nV/sqrt Hz |
| Height | 1.1mm |
| Length | 3.2mm |
| Width | 3.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8418BRMZ Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. Op amp rates 200μV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.6mA and 10 . Keeping the voltage gain at 26.02dB is the best course of action. The op amp ic has 1 channels on it. The operating supply voltage of the buffer op amp is rated at 5V.
AD8418BRMZ Features
8 Pins
supply voltage of 5V
26.02dB voltage gain
AD8418BRMZ Applications
There are a lot of Analog Devices Inc. AD8418BRMZ Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Video amplifiers
- Test equipment
- RF cable systems
- Industrial control system
- PDA
- pH (acidity)
- Information processing
- Medical imaging
- High input resistance broadband
