AD841JNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~75°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.5W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD841 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Power Dissipation | 1.5W |
| Output Current | 50mA |
| Quiescent Current | 11mA |
| Slew Rate | 300V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3.5μA |
| Voltage - Supply, Single/Dual (±) | ±5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 40000 kHz |
| Voltage Gain | 93.06dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 800μV |
| Settling Time | 90 ns |
| Bias Current-Max (IIB) @25C | 8μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Height | 3.3mm |
| Length | 19.05mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD841JNZ Overview
A 14-DIP (0.300, 7.62mm) case is used to package the op amp. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. We are approaching the 14h termination of the year. A total of 14 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are available on the instrumentation amplifier. There is an input offset voltage of 500μV for this buffer op amp. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at 0°C~75°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 11mA and 10 . It is recommended to keep the voltage gain at 93.06dB at all times. Op amp ic has 1 channels. There is an 11mA quiescent current in linear amplifier.
AD841JNZ Features
14 Pins
supply voltage of 15V
93.06dB voltage gain
AD841JNZ Applications
There are a lot of Analog Devices Inc. AD841JNZ Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Video amplifiers
- Wireless base stations
- PDA
- Voltage regulation circuit
- High gain DC amplifier
- Power transmission
- Signal transformation
- Radar
- Blood pressure sensors
