AD8421BRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8421 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2.6mA |
| Slew Rate | 35V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.006μA |
| Power Supply Rejection Ratio (PSRR) | 150dB |
| -3db Bandwidth | 10MHz |
| Max Junction Temperature (Tj) | 150°C |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.005% |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8421BRZ Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Instrumentation-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. An 8-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 25μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Operational amplifier can operate supply current at 2.3mA. The voltage gain should stay at 80dB. Op amp ic has 1 channels.
AD8421BRZ Features
8 Pins
supply voltage of 15V
80dB voltage gain
AD8421BRZ Applications
There are a lot of Analog Devices Inc. AD8421BRZ Instrumentational OP Amps applications.
- Micro signal measurement
- Home audio systems
- Proportional operation circuits
- Communication
- Comparator
- Inverse/same-phase proportional circuit
- Non-polarized electrodes
- Measurements of Wheatstone bridge
- Ultrasound transducers
- Biopotential
