AD8421TRMZ-EP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8421 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 2mA |
| Slew Rate | 35V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 70μV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 10MHz |
| Input Offset Current-Max (IIO) | 0.003μA |
| Max Junction Temperature (Tj) | 150°C |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.005% |
| Height | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8421TRMZ-EP Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. I would like to remind you that this buffer op amp should be powered by an 15V battery. An 8-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 70μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -55°C~125°C . This op amp can operate from a supply current at 2.3mA. There are 1 circuits on op amps. In this op amp ic, the minimum voltage gain is 1.
AD8421TRMZ-EP Features
8 Pins
supply voltage of 15V
AD8421TRMZ-EP Applications
There are a lot of Analog Devices Inc. AD8421TRMZ-EP Instrumentational OP Amps applications.
- Industrial control system
- Comparator
- Information processing
- Weak signal detection
- Medical imaging
- Video computer boards
- Integrator circuits
- Automatic control
- Automation control systems
- Signal operation
