banner_page

AD8422ARZ

1 Channels 20mA per Channel 500pA 94 dB Instrumentational OP Amps 0.002μA 3.6V~36V ±1.8V~18V AD8422 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD8422ARZ
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 187
  • Description: 1 Channels 20mA per Channel 500pA 94 dB Instrumentational OP Amps 0.002μA 3.6V~36V ±1.8V~18V AD8422 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AD8422
Pin Count 8
Output Type Rail-to-Rail
Number of Channels 1
Operating Supply Current 300μA
Nominal Supply Current 300μA
Max Supply Current 1nA
Slew Rate 0.8V/μs
Amplifier Type Instrumentation
Common Mode Rejection Ratio 94 dB
Current - Input Bias 500pA
Voltage - Supply, Single/Dual (±) 3.6V~36V ±1.8V~18V
Output Current per Channel 20mA
Input Offset Voltage (Vos) 300nV
Bandwidth 2.2MHz
Gain Bandwidth Product 2.2MHz
Neg Supply Voltage-Nom (Vsup) -15V
Average Bias Current-Max (IIB) 0.002μA
Voltage - Input Offset 60μV
-3db Bandwidth 2.2MHz
Voltage Gain-Min 1
Voltage Gain-Nom 10
Non-linearity-Max 0.002%
Height 1.5mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

AD8422ARZ Overview


Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the Instrumentation type. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 15V battery. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 300nV voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. An 300μA volt supply current is needed for this linear amplifier to operate. Op amp ic has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are a maximum of 1 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain.

AD8422ARZ Features


8 Pins
supply voltage of 15V
Output Type: Rail-to-Rail

AD8422ARZ Applications


There are a lot of Analog Devices Inc. AD8422ARZ Instrumentational OP Amps applications.

  • Exponential operation circuits
  • High input resistance broadband
  • High gain DC amplifier
  • MP3
  • Band-pass filter
  • Proportional operation circuits
  • Measurements of Wheatstone bridge
  • Test and measurement instruments
  • Portable media players
  • Car stereo

Write a review

Note: HTML is not translated!
    Bad           Good