AD8422BRMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 200GOhm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8422 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 300μA |
| Nominal Supply Current | 300μA |
| Max Supply Current | 30μA |
| Slew Rate | 0.8V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 3.6V~36V ±1.8V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 300nV |
| Bandwidth | 2.2MHz |
| Gain Bandwidth Product | 2.2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Voltage - Input Offset | 50μV |
| -3db Bandwidth | 2.2MHz |
| Input Offset Current-Max (IIO) | 0.0003μA |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.002% |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8422BRMZ Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the Instrumentation type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 300nV voltage. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 300μA . Maintain 60dB as the voltage gain. Instrumentation amplifier has 1 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. Instrumentation amplifier resistance should stay within the range of 200GOhm.
AD8422BRMZ Features
8 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 200GOhm
AD8422BRMZ Applications
There are a lot of Analog Devices Inc. AD8422BRMZ Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Signal operation
- RF cable systems
- Voltage regulation circuit
- Instrumentation
- Wireless base stations
- Addition operation circuits
- Non-polarized electrodes
- Industrial applications including automation
- Medical instruments
