AD8426ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 800MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8426 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 350μA |
| Slew Rate | 0.6V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~36V ±1.35V~18V |
| Output Current per Channel | 13mA |
| Input Offset Voltage (Vos) | 5μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| -3db Bandwidth | 1MHz |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 0.0015μA |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.075% |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8426ACPZ-R7 Overview
Op amp is packaged in 16-VQFN, CSP case. Buffer amps of this type are called Instrumentation-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 16 terminations in the next few months. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. An 16-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 5μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . This op amp can operate from a supply current at 350μA. 60dB should be the voltage gain. Buffer op amp is equipped with 2 channels on the device. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. Instrumentation amplifier resistance should remain within the range of 800MOhm.
AD8426ACPZ-R7 Features
16 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 800MOhm
AD8426ACPZ-R7 Applications
There are a lot of Analog Devices Inc. AD8426ACPZ-R7 Instrumentational OP Amps applications.
- Biopotential
- Portable media players
- Polarized electrodes
- Multimedia playback equipment
- Digital cameras
- Oscilloscopes
- Precision measurement
- pH (acidity)
- Gaming industry
- Active probe
