AD8429ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8429 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 6.7mA |
| Nominal Supply Current | 6.7mA |
| Max Supply Current | 7mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 15MHz |
| Gain Bandwidth Product | 15MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Voltage - Input Offset | 150μV |
| -3db Bandwidth | 15MHz |
| Voltage Gain-Nom | 10 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8429ARZ Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. A Instrumentation-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tube case. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. 8 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 50μV voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 6.7mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 80dB at all times. On the buffer amps, there are 1 channels that can be used. It is important that the linear amplifier resistance stays within the range of 10kOhm.
AD8429ARZ Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10kOhm
AD8429ARZ Applications
There are a lot of Analog Devices Inc. AD8429ARZ Instrumentational OP Amps applications.
- Integrator circuits
- Large motor controllers
- Digital cameras
- ECG equipment
- Non-polarized electrodes
- Oscilloscopes
- earphone
- Computer workstations
- Band-pass filter
- Exponential operation circuits
