AD8432ACPZ-WP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 6.2kOhm |
| Subcategory | Operational Amplifier |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8432 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Test Frequency | 10MHz |
| Operating Supply Current | 24mA |
| Nominal Supply Current | 24mA |
| Power Dissipation | 120mW |
| Quiescent Current | 12mA |
| Slew Rate | 295V/μs |
| Amplifier Type | Voltage Feedback |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 77mA |
| Input Offset Voltage (Vos) | 300μV |
| Power Supply Rejection Ratio (PSRR) | -82dB |
| Voltage - Input Offset | 1mV |
| Gain | 24.08 dB |
| Input Capacitance | 6pF |
| Noise Figure | 2.3 dB |
| Height | 750μm |
| Length | 4mm |
| Width | 4.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8432ACPZ-WP Overview
A 24-WFQFN Exposed Pad, CSP case is used to package the op amp. This is a Voltage Feedback type op amp. The op amp is delivered to you in a Tray case. We are approaching the 24h termination of the year. There are a total of 24 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 24 pins that make up the linear amplifier. There is an input offset voltage of 300μV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 24mA, this op amp ic can operate. The op amp ic has 2 channels on it. One of its many advantages is that buffer op amp outputs Differential signals. The operating supply voltage of the buffer op amp is rated at 5V. As a result, linear amplifier's quiescent current is 12mA. It is important that the linear amplifier resistance stays within the range of 6.2kOhm.
AD8432ACPZ-WP Features
24 Pins
supply voltage of 5V
Output Type: Differential
Resistance of 6.2kOhm
AD8432ACPZ-WP Applications
There are a lot of Analog Devices Inc. AD8432ACPZ-WP Instrumentational OP Amps applications.
- Medical instruments
- Test and measurement instruments
- Portable docking station
- single/dual op amp sum and difference circuits
- Ultrasound transducers
- Mobile phone
- Large motor controllers
- Video amplifiers
- Switching amplifier
- Biopotential
