AD844BQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD844 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Power Dissipation | 1.1W |
| Quiescent Current | 6.5mA |
| Slew Rate | 2000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 150pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 60MHz |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 60000 kHz |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 108dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Settling Time | 100 ns |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Input Capacitance | 2pF |
| Input Voltage Noise Density | 2nV/sqrt Hz |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD844BQ Overview
In order to protect the op amps, a 8-CDIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 8 mark. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 8 pins. Op amp rates 50μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Operational amplifier can operate supply current at 6.5mA. There are 1 channels on the operational amplifiers. The quiescent current is 6.5mA.
AD844BQ Features
8 Pins
supply voltage of 15V
AD844BQ Applications
There are a lot of Analog Devices Inc. AD844BQ Instrumentational OP Amps applications.
- Medical instruments
- Industrial control system
- Automatic control
- Communication
- Division circuits
- Weighing systems
- High/low-pass filter circuit
- Image computer boards
- Test equipment
- Power transmission
