AD844JRZ-16-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD844 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Power Dissipation | 1.1W |
| Quiescent Current | 6.5mA |
| Supply Current-Max | 8.5mA |
| Slew Rate | 2000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 60000 kHz |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 108dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Settling Time | 100 ns |
| Bias Current-Max (IIB) @25C | 0.45μA |
| Input Capacitance | 2pF |
| Input Voltage Noise Density | 2nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD844JRZ-16-REEL7 Overview
Op amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 16 terminations in the next few months. Buffer amplifier has a total of 16 pins on it. I would like to remind you that this buffer op amp should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 16 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 50μV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . An 6.5mA volt supply current is needed for this linear amplifier to operate. Buffer op amp is equipped with 1 channels on the device. The quiescent current is 6.5mA.
AD844JRZ-16-REEL7 Features
16 Pins
supply voltage of 15V
AD844JRZ-16-REEL7 Applications
There are a lot of Analog Devices Inc. AD844JRZ-16-REEL7 Instrumentational OP Amps applications.
- Test equipment
- Laptop
- Ultrasound transducers
- Automotive sensors
- Strain gauges
- Test and measurement instruments
- High speed sample
- Proportional counter tubes
- Instrumentation
- Car stereo
