AD845JRZ-16
| Parameters | |
|---|---|
| Input Voltage Noise Density | 80nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.5W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD845 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 10mA |
| Power Dissipation | 1.5W |
| Quiescent Current | 10mA |
| Slew Rate | 100V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 750pA |
| Voltage - Supply, Single/Dual (±) | ±4.75V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 16MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 16000 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.045μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 700μV |
| Bias Current-Max (IIB) @25C | 0.002μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 4pF |
AD845JRZ-16 Overview
In order to protect the op amps, a 16-SOIC (0.295, 7.50mm Width) case is used. A J-FET-type buffer amplifier is shown here. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 16. A total of 16 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 16 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 250μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 10mA . There should be no change in the voltage gain. Op amp ic has 1 channels. As a result, linear amplifier's quiescent current is 10mA.
AD845JRZ-16 Features
16 Pins
supply voltage of 15V
113.98dB voltage gain
AD845JRZ-16 Applications
There are a lot of Analog Devices Inc. AD845JRZ-16 Instrumentational OP Amps applications.
- Wireless base stations
- Vehicle electronics
- Image computer boards
- Navigation
- Medical imaging
- Micro signal measurement
- Medical instruments
- Precision measurement
- Addition operation circuits
- Television
