AD8465WBCPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 42mW |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8465 |
| Pin Count | 12 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, LVDS, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Power Dissipation | 42mW |
| Output Current | 50mA |
| Propagation Delay | 3 ns |
| Quiescent Current | 3mA |
| Turn On Delay Time | 1.6 ns |
| Response Time | 1.6 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 62dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 3mA |
| Voltage - Input Offset (Max) | 2mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 60dB PSRR |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8465WBCPZ-R7 Overview
In order to facilitate transportation, it is packaged in 12-WFQFN Exposed Pad, CSP .Output type of this comparator is Complementary, LVDS, Rail-to-Rail .This device is designed in Tape & Reel (TR) case.12 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 2.5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type with Latch .There are a total of 1 elements in it.The board includes 12 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .There are 12 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search AD8465 .There is a quiescent current of 3mA in this comparator.3/5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum of 5μA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 62dB .Comparator electronics is a comparator part from the Automotive series.
AD8465WBCPZ-R7 Features
Complementary, LVDS, Rail-to-Rail output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 3mA
Voltage Gain: 62dB
AD8465WBCPZ-R7 Applications
There are a lot of Analog Devices Inc. AD8465WBCPZ-R7 linear comparators applications.
- Hand-Held Electronics
- Current and voltage sensing
- Laptop Computers
- Window Comparators
- Power Supervision
- General Purpose Low Voltage Applications
- Window Comparators
- Mobile Phones and Tablets
- Pulse, Squarewave, and Time Delay Generators
- Notebooks and PDAs
