AD8475ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 16mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8475 |
| Pin Count | 10 |
| Output Type | Differential, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3.2mA |
| Min Input Voltage | -12.5V |
| Slew Rate | 50V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 76 dB |
| Max Input Voltage | 12.5V |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 110mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 150MHz |
| Gain Bandwidth Product | 150MHz |
| Voltage Gain | 7.96dB |
| Gain | 2 dB |
| Settling Time | 45 ns |
| Dual Supply Voltage | 3V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8475ARMZ Overview
In order to protect the op amps, a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case is used. Differential-type instrumentation amplifiers are used in this application. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. We are approaching the 10h termination of the year. A total of 10 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 10 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 200μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. As long as the supply current of the chip does not exceed 3mA, this op amp ic can operate. There should be no change in the voltage gain at 7.96dB. Op amp ic has 1 channels. One of its many advantages is that buffer op amp outputs Differential, Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
AD8475ARMZ Features
10 Pins
supply voltage of 5V
7.96dB voltage gain
Output Type: Differential, Rail-to-Rail
AD8475ARMZ Applications
There are a lot of Analog Devices Inc. AD8475ARMZ Instrumentational OP Amps applications.
- ECG equipment
- Portable media players
- Fast A/D and D/A converters
- single/dual op amp sum and difference circuits
- MP3
- Automation control systems
- Ultrasound transducers
- Micro signal measurement
- Measurements of Wheatstone bridge
- Biopotential
