AD8475ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Weight | 143.193441mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8475 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Differential, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 3mA |
| Supply Current-Max | 3.2mA |
| Slew Rate | 50V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 76 dB |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 110mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 150MHz |
| Voltage Gain | 7.96dB |
| Gain | 2 dB |
| Dual Supply Voltage | 3V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8475ARMZ-R7 Overview
It is packaged in an 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Differential-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 10. A total of 10 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 10 pins are included on the operational amplifiers. There is an input offset voltage of 200μV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 3mA . Maintain 7.96dB as the voltage gain. One of the advantages of this op amp is that it outputs Differential, Rail-to-Rail signals, which is one of its many advantages. A voltage rating of 1 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
AD8475ARMZ-R7 Features
10 Pins
supply voltage of 5V
7.96dB voltage gain
Output Type: Differential, Rail-to-Rail
AD8475ARMZ-R7 Applications
There are a lot of Analog Devices Inc. AD8475ARMZ-R7 Instrumentational OP Amps applications.
- Polarized electrodes
- Digital cameras
- Test equipment
- Video computer boards
- Fission chambers
- Radar
- Image computer boards
- Semiconductor detectors
- High/low-pass filter circuit
- Video conversion and routing
