AD847AQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD847 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 5.3mA |
| Power Dissipation | 1.1W |
| Quiescent Current | 4.8mA |
| Supply Current-Max | 7.6mA |
| Slew Rate | 300V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 35000 kHz |
| Voltage Gain | 70.88dB |
| Average Bias Current-Max (IIB) | 7.5μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 120 ns |
| Bias Current-Max (IIB) @25C | 5μA |
| Input Capacitance | 1.5pF |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height | 3.56mm |
| Length | 10.29mm |
| Width | 8.13mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD847AQ Overview
There is a 8-CDIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 1mV as input offset voltage. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Using an 5.3mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 70.88dB. Instrumentation amplifier has 1 channels on it. Linear amplifier has a quiescent current of 4.8mA.
AD847AQ Features
8 Pins
supply voltage of 5V
70.88dB voltage gain
AD847AQ Applications
There are a lot of Analog Devices Inc. AD847AQ Instrumentational OP Amps applications.
- Medical imaging
- Subtraction operation circuits
- Proportional operation circuits
- High speed sample
- Digital cameras
- Measurements of Wheatstone bridge
- Large motor controllers
- Portable docking station
- Switching amplifier
- Comparator
