AD847ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD847 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 5.3mA |
| Power Dissipation | 800mW |
| Quiescent Current | 4.8mA |
| Supply Current-Max | 7.6mA |
| Slew Rate | 300V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 35000 kHz |
| Voltage Gain | 70.88dB |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 120 ns |
| Bias Current-Max (IIB) @25C | 6.6μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 1.5pF |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD847ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are located on the operational amplifiers. There is an input offset voltage of 1mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using an 5.3mA supply current, this operational amplifier ics can be operated. It is a member of the 70.88dB's 70.88dB family. There are 1 channels on the operational amplifiers. As a result, linear amplifier's quiescent current is 4.8mA.
AD847ARZ Features
8 Pins
supply voltage of 5V
70.88dB voltage gain
AD847ARZ Applications
There are a lot of Analog Devices Inc. AD847ARZ Instrumentational OP Amps applications.
- Video conversion and routing
- Digital cameras
- Computer workstations
- Signal transformation
- Polarized electrodes
- Laptop
- Power control
- Weighing systems
- Commercial audio systems
- Television broadcasting equipment
