AD847ARZ-REEL7

1 Channels 32mA per Channel 3.3μA 95 dB Instrumentational OP Amps ±4.5V~18V AD847 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD847ARZ-REEL7
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 165
Description: 1 Channels 32mA per Channel 3.3μA 95 dB Instrumentational OP Amps ±4.5V~18V AD847 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Max Power Dissipation	800mW
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD847
Pin Count	8
Qualification Status	Not Qualified
Number of Channels	1
Operating Supply Current	5.3mA
Power Dissipation	800mW
Quiescent Current	4.8mA
Supply Current-Max	7.6mA
Slew Rate	300V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	95 dB
Current - Input Bias	3.3μA
Voltage - Supply, Single/Dual (±)	±4.5V~18V
Output Current per Channel	32mA
Input Offset Voltage (Vos)	1mV
Gain Bandwidth Product	50MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	35000 kHz
Voltage Gain	70.88dB
Power Supply Rejection Ratio (PSRR)	86dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	500μV
Settling Time	120 ns
Bias Current-Max (IIB) @25C	6.6μA
Input Capacitance	1.5pF
Input Voltage Noise Density	15nV/sqrt Hz
Height Seated (Max)	2.59mm
Length	4.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD847ARZ-REEL7 Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 1mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . You can run this op amp ic on 5.3mA . There should be no change in the voltage gain at 70.88dB. As far as the device is concerned, buffer amplifier has 1 channels. It is used TAPE AND REEL to pack the op amps. Buffer amplifier has a quiescent current of 4.8mA.