AD847JN
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.2W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD847 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 5.3mA |
| Nominal Supply Current | 5.3mA |
| Power Dissipation | 1.2W |
| Quiescent Current | 4.8mA |
| Slew Rate | 300V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 35000 kHz |
| Voltage Gain | 70.88dB |
| Average Bias Current-Max (IIB) | 7.2μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 120 ns |
| Bias Current-Max (IIB) @25C | 6.6μA |
| Input Capacitance | 1.5pF |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height Seated (Max) | 5.33mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD847JN Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tube case. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 1mV. For this electrical component, Through Hole is the recommended mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. A supply current of 5.3mA can be used to operate this linear amplifier. 70.88dB should be the voltage gain. There are 1 channels on the operational amplifiers. Buffer amplifier has a quiescent current of 4.8mA.
AD847JN Features
8 Pins
supply voltage of 5V
70.88dB voltage gain
AD847JN Applications
There are a lot of Analog Devices Inc. AD847JN Instrumentational OP Amps applications.
- Communication device
- Instrumentation
- Comparator
- Test equipment
- Active probe
- Power transmission
- single/dual op amp sum and difference circuits
- Laptop
- Home audio systems
- Navigation
