AD847JRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD847 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 5.3mA |
| Power Dissipation | 800mW |
| Quiescent Current | 4.8mA |
| Supply Current-Max | 7.6mA |
| Slew Rate | 300V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 35000 kHz |
| Voltage Gain | 70.88dB |
| Average Bias Current-Max (IIB) | 7.2μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 120 ns |
| Bias Current-Max (IIB) @25C | 6.6μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 1.5pF |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD847JRZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 1mV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 5.3mA . 70.88dB should remain the voltage gain. Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 5V voltage. There is an 4.8mA quiescent current running through op amp ic.
AD847JRZ Features
8 Pins
supply voltage of 5V
70.88dB voltage gain
AD847JRZ Applications
There are a lot of Analog Devices Inc. AD847JRZ Instrumentational OP Amps applications.
- Computer workstations
- High input resistance broadband
- Industrial control system
- Measurements of Wheatstone bridge
- Car stereo
- Automation control systems
- Scintillation detectors
- Test and measurement instruments
- Multiplication circuits
- Biopotential
