AD847SQ/883B
| Parameters | |
|---|---|
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Military, MIL-STD-883B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD847 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 5.3mA |
| Power Dissipation | 1.1W |
| Quiescent Current | 4.8mA |
| Slew Rate | 300V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 35000 kHz |
| Voltage Gain | 70.88dB |
| Average Bias Current-Max (IIB) | 7.5μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 120 ns |
| Current - Output / Channel | 32mA |
| Bias Current-Max (IIB) @25C | 5μA |
| Input Capacitance | 1.5pF |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
AD847SQ/883B Overview
In order to protect the op amps, a 8-CDIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. Op amp rates 1mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -55°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 5.3mA and 10 . 70.88dB should remain the voltage gain. On the buffer amps, there are 1 channels that can be used. The Military, MIL-STD-883B indicates the series number of the op amp. Currently, linear amplifier is operating with a quiescent current of 4.8mA.
AD847SQ/883B Features
8 Pins
supply voltage of 5V
70.88dB voltage gain
AD847SQ/883B Applications
There are a lot of Analog Devices Inc. AD847SQ/883B Instrumentational OP Amps applications.
- Differentiator circuits
- Portable electronic products powered by batteries
- Communication
- Cinema or auditorium audio system
- Medical instruments
- Band-stop filter
- High/low-pass filter circuit
- Hand-held batteries
- Home audio systems
- Broadcasting
