AD848JRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 900mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD848 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 5.1mA |
| Nominal Supply Current | 5.1mA |
| Power Dissipation | 900mW |
| Output Current | 20mA |
| Quiescent Current | 4.8mA |
| Slew Rate | 300V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 2.3mV |
| Bandwidth | 175MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 175000 kHz |
| Voltage Gain | 82.28dB |
| Average Bias Current-Max (IIB) | 7.2μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=5 |
| Voltage - Input Offset | 200μV |
| Settling Time | 80 ns |
| Bias Current-Max (IIB) @25C | 6.6μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 1.5pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD848JRZ Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 2.3mV voltage. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. This op amp can operate from a supply current at 5.1mA. 82.28dB should remain the voltage gain. Buffer op amp is equipped with 1 channels on the device. The current is quiescent at 4.8mA.
AD848JRZ Features
8 Pins
supply voltage of 15V
82.28dB voltage gain
AD848JRZ Applications
There are a lot of Analog Devices Inc. AD848JRZ Instrumentational OP Amps applications.
- Commercial audio systems
- Weak signal detection
- Home audio systems
- Power transmission
- Fast A/D and D/A converters
- Multiplication circuits
- Measurements of Wheatstone bridge
- Large motor controllers
- Displayers for aircraft and air transportation control systems
- Thermocouples
