AD8500AKSZ-R2
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8500 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 750nA |
| Nominal Supply Current | 750nA |
| Quiescent Current | 750nA |
| Slew Rate | 0.004V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 235μV |
| Bandwidth | 7 kHz |
| Unity Gain BW-Nom | 7 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Capacitance | 4.5pF |
| Max Junction Temperature (Tj) | 150°C |
| Input Voltage Noise Density | 190nV/sqrt Hz |
| Height | 1.1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8500AKSZ-R2 Overview
In the package, you will find a 5-TSSOP, SC-70-5, SOT-353-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 5h termination of the year. It consists of a total of 5 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 5 pins. There is an input offset voltage of 235μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 750nA and 10 . It is a member of the 120dB's 120dB family. 1 channels are available on the instrumentation amplifier. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is a quiescent current of 750nA in this operational amplifier circuit.
AD8500AKSZ-R2 Features
5 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD8500AKSZ-R2 Applications
There are a lot of Analog Devices Inc. AD8500AKSZ-R2 Instrumentational OP Amps applications.
- Automation control systems
- Active probe
- Medical imaging
- Video conversion and routing
- Video data acquisition
- Division circuits
- Medical instruments
- Information processing
- Tablets
- Differentiator circuits
