Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
AD8500 |
Pin Count |
5 |
Output Type |
Rail-to-Rail |
Number of Channels |
1 |
Operating Supply Current |
750nA |
Quiescent Current |
750nA |
Supply Current-Max |
0.002mA |
Slew Rate |
0.004V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±0.9V~2.75V |
Output Current per Channel |
5mA |
Input Offset Voltage (Vos) |
1mV |
Bandwidth |
7 kHz |
Unity Gain BW-Nom |
7 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
110dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
235μV |
Low-Bias |
YES |
Micropower |
YES |
Programmable Power |
NO |
Input Capacitance |
4.5pF |
Input Voltage Noise Density |
190nV/sqrt Hz |
Length |
2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8500AKSZ-REEL7 Overview
A 5-TSSOP, SC-70-5, SOT-353 case is used to package the op amp. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. The pins on this board total to 5 in total. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 5 pins. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using an 750nA supply current, this operational amplifier ics can be operated. 120dB should remain the voltage gain. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. 750nA quiescent currents are flowing through buffer op amp.
AD8500AKSZ-REEL7 Features
5 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD8500AKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8500AKSZ-REEL7 Instrumentational OP Amps applications.
- Weak signal detection
- Comparator
- Semiconductor detectors
- Non-polarized electrodes
- Displayers for aircraft and air transportation control systems
- Large motor controllers
- Wireless base stations
- Portable docking station
- ECG equipment
- Inverse/same-phase proportional circuit