AD8502ARJZ-REEL7

2 Channels 5mA per Channel 1pA 76 dB Instrumentational OP Amps 0.0006μA 1.8V~5.5V ±0.9V~2.75V AD8502 8 Pins SOT-23-8

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8502ARJZ-REEL7
Package: SOT-23-8
Datasheet: PDF
Stock: 824
Description: 2 Channels 5mA per Channel 1pA 76 dB Instrumentational OP Amps 0.0006μA 1.8V~5.5V ±0.9V~2.75V AD8502 8 Pins SOT-23-8(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	SOT-23-8
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	AD8502
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	2μA
Quiescent Current	1μA
Supply Current-Max	0.004mA
Slew Rate	0.004V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	76 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	5mA
Input Offset Voltage (Vos)	3mV
Bandwidth	7 kHz
Unity Gain BW-Nom	7 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0006μA
Power Supply Rejection Ratio (PSRR)	105dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Input Capacitance	4.5pF
Input Voltage Noise Density	190nV/sqrt Hz
Height Seated (Max)	1.45mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD8502ARJZ-REEL7 Overview

There is a SOT-23-8 case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 1.8V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . An 2μA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 120dB at all times. Buffer op amp is equipped with 2 channels on the device. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. There is an 1μA quiescent current running through op amp ic.