AD8505ACBZ-R7
| Parameters | |
|---|---|
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8505 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 25.5μA |
| Quiescent Current | 25.5μA |
| Supply Current-Max | 0.0255mA |
| Slew Rate | 0.013V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 95kHz |
| Unity Gain BW-Nom | 95 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Capacitance | 4.2pF |
| Wideband | NO |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
AD8505ACBZ-R7 Overview
Op amp is packaged in 6-UFBGA, WLCSP case. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 6h termination of the year. The total number of pins on linear amplifier is 6. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 6 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 2.5mV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 25.5μA . 120dB should remain the voltage gain. There are 1 channels on the operational amplifiers. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V. TAPE AND REEL is adopted to pack the instrumentation amplifier. There is a quiescent current of 25.5μA in this operational amplifier circuit.
AD8505ACBZ-R7 Features
6 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD8505ACBZ-R7 Applications
There are a lot of Analog Devices Inc. AD8505ACBZ-R7 Instrumentational OP Amps applications.
- Vehicle electronics
- Thermocouples
- Automation control systems
- Instrumentation
- Fission chambers
- Test equipment
- Power transmission
- Video computer boards
- Weighing systems
- High gain DC amplifier
