AD8505ACBZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8505 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 25.5μA |
| Quiescent Current | 25.5μA |
| Supply Current-Max | 0.0255mA |
| Slew Rate | 0.013V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 95kHz |
| Unity Gain BW-Nom | 95 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Capacitance | 4.2pF |
| Wideband | NO |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8505ACBZ-RL Overview
The linear amplifier is packaged in a 6-UFBGA, WLCSP case. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 6. It consists of a total of 6 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 6 pins. There is an input offset voltage of 2.5mV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 25.5μA and 10 . Maintain 120dB as the voltage gain. There are 1 channels on the operational amplifiers. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 3V voltage. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Currently, linear amplifier is operating with a quiescent current of 25.5μA.
AD8505ACBZ-RL Features
6 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD8505ACBZ-RL Applications
There are a lot of Analog Devices Inc. AD8505ACBZ-RL Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Inverse/same-phase proportional circuit
- Active probe
- Precision measurement
- High/low-pass filter circuit
- Navigation
- Information processing
- Portable electronic products powered by batteries
- Automotive sensors
- Computer workstations
