AD8505ARJZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8505 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 25.5μA |
| Quiescent Current | 25.5μA |
| Slew Rate | 0.013V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 95 kHz |
| Unity Gain BW-Nom | 95 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Capacitance | 4.2pF |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8505ARJZ-R7 Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. During the past two weeks, there have been close to 5 terminations. A total of 5 pins are located on this board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. It has 5 pins that make up the linear amplifier. Op amp rates 2.5mV as input offset voltage. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureA supply current of 25.5μA can be used to operate this linear amplifier. There should be no change in the voltage gain. The op amp ic has 1 channels on it. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 3V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. There is a quiescent current of 25.5μA in this operational amplifier circuit.
AD8505ARJZ-R7 Features
5 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD8505ARJZ-R7 Applications
There are a lot of Analog Devices Inc. AD8505ARJZ-R7 Instrumentational OP Amps applications.
- Polarized electrodes
- MP3
- Digital cameras
- Video amplifiers
- Blood pressure sensors
- Mobile phone
- Switching amplifier
- Differentiator circuits
- Automation control systems
- Power generator
