AD8506ACBZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFBGA, WLCSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8506 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 40μA |
| Quiescent Current | 20μA |
| Supply Current-Max | 0.05mA |
| Slew Rate | 0.013V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 95 kHz |
| Unity Gain BW-Nom | 95 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Input Capacitance | 4.2pF |
| Input Voltage Noise Density | 45nV/sqrt Hz |
| Height Seated (Max) | 0.645mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8506ACBZ-REEL7 Overview
There is a 8-UFBGA, WLCSP case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. Instrumentation amplifier is a part of Operational Amplifiers. The op amp ic has an array of 8 pins on it. The input offset voltage is 2.5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. A supply current of 40μA can be used to operate this linear amplifier. The voltage gain should stay at 120dB. Instrumentation amplifier has 2 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 3V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. Linear amplifier has a quiescent current of 20μA.
AD8506ACBZ-REEL7 Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD8506ACBZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8506ACBZ-REEL7 Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Television
- Hand-held batteries
- Non-polarized electrodes
- Power control
- E-book readers
- Medical imaging
- High-frequency data acquisition systems
- Fission chambers
- Industrial applications including automation
