AD8512ARMZ
| Parameters | |
|---|---|
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | JFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8512 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 5mA |
| Quiescent Current | 2.5mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 100.59dB |
| Average Bias Current-Max (IIB) | 0.0075μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Settling Time | 900 ns |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Voltage Noise Density | 34nV/sqrt Hz |
| Height | 850μm |
AD8512ARMZ Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called J-FET-types. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 400μV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 5mA and 10 . There should be no change in the voltage gain. On the buffer amps, there are 2 channels that can be used. There is an 2.5mA quiescent current in linear amplifier.
AD8512ARMZ Features
8 Pins
supply voltage of 5V
100.59dB voltage gain
AD8512ARMZ Applications
There are a lot of Analog Devices Inc. AD8512ARMZ Instrumentational OP Amps applications.
- E-book readers
- Power generator
- Automation control systems
- Weighing systems
- Portable media players
- Band-stop filter
- Portable electronic products powered by batteries
- Logarithmic operation circuits
- High speed sample
- Blood pressure sensors
