Parameters |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
JFET |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8512 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Power Supplies |
+-5/+-15V |
Number of Channels |
2 |
Operating Supply Current |
5mA |
Quiescent Current |
2.5mA |
Slew Rate |
20V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
100 dB |
Current - Input Bias |
25pA |
Voltage - Supply, Single/Dual (±) |
±4.5V~18V |
Output Current per Channel |
70mA |
Input Offset Voltage (Vos) |
400μV |
Gain Bandwidth Product |
8MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
8000 kHz |
Voltage Gain |
100.59dB |
Average Bias Current-Max (IIB) |
0.01μA |
Power Supply Rejection Ratio (PSRR) |
130dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Voltage - Input Offset |
80μV |
Settling Time |
900 ns |
Low-Bias |
YES |
Micropower |
NO |
Programmable Power |
NO |
Wideband |
NO |
Input Voltage Noise Density |
34nV/sqrt Hz |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
AD8512BR-REEL7 Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the J-FET type. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are included on the operational amplifiers. Op amp rates 400μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 5mA can be used to operate this linear amplifier. Op amp is a member of the 100.59dB's 100.59dB family. 2 channels are available on the instrumentation amplifier. There is a quiescent current of 2.5mA in this operational amplifier circuit.
AD8512BR-REEL7 Features
8 Pins
supply voltage of 5V
100.59dB voltage gain
AD8512BR-REEL7 Applications
There are a lot of Analog Devices Inc. AD8512BR-REEL7 Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Broadcasting
- Inverse/same-phase proportional circuit
- Home audio systems
- High/low-pass filter circuit
- Car stereo
- Computer workstations
- Multimedia playback equipment
- Ultrasound transducers
- Television broadcasting equipment