AD8515ART-REEL
| Parameters | |
|---|---|
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8515 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 410μA |
| Quiescent Current | 500μA |
| Supply Current-Max | 0.6mA |
| Slew Rate | 2.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.008μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00003μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 22nV/sqrt Hz |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
AD8515ART-REEL Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. A total of 5 terminations have been reported in the past few weeks. Buffer amplifier has a total of 5 pins. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 5-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 410μA . 126.02dB should remain the voltage gain. There are 1 channels on the operational amplifiers. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 3V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The quiescent current is 500μA.
AD8515ART-REEL Features
5 Pins
supply voltage of 3V
126.02dB voltage gain
Output Type: Rail-to-Rail
AD8515ART-REEL Applications
There are a lot of Analog Devices Inc. AD8515ART-REEL Instrumentational OP Amps applications.
- Radar
- Band-stop filter
- Information processing
- Broadcasting
- Switching amplifier
- Automatic control
- Industrial applications including automation
- Integrator circuits
- Home audio systems
- Polarized electrodes
