AD8515ARTZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8515 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 500μA |
| Quiescent Current | 500μA |
| Supply Current-Max | 0.6mA |
| Slew Rate | 2.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.008μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00003μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 22nV/sqrt Hz |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8515ARTZ-REEL Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be at least 5 terminations this year. Linear amplifier has a total of 5 pins. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 5 pins. There is an input offset voltage of 6mV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 500μA and 10 . 126.02dB should remain the voltage gain. The op amp ic has 1 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. There is an 500μA quiescent current in linear amplifier.
AD8515ARTZ-REEL Features
5 Pins
supply voltage of 3V
126.02dB voltage gain
Output Type: Rail-to-Rail
AD8515ARTZ-REEL Applications
There are a lot of Analog Devices Inc. AD8515ARTZ-REEL Instrumentational OP Amps applications.
- Communication
- single/dual op amp sum and difference circuits
- ECG equipment
- Non-polarized electrodes
- High/low-pass filter circuit
- Weighing systems
- Digital cameras
- Division circuits
- Commercial audio systems
- Active probe
