AD8529ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8529 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Channels | 2 |
| Operating Supply Current | 2.4mA |
| Max Supply Current | 2.4mA |
| Quiescent Current | 1.2mA |
| Slew Rate | 2.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 600μV |
| Settling Time | 1 μs |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Dual Supply Voltage | 5V |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8529ARZ Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.4mA and 10 . It is recommended to keep the voltage gain at 100dB at all times. Buffer op amp is equipped with 2 channels on the device. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 9V. There is an 1.2mA quiescent current running through op amp ic.
AD8529ARZ Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
AD8529ARZ Applications
There are a lot of Analog Devices Inc. AD8529ARZ Instrumentational OP Amps applications.
- High input resistance broadband
- High speed sample
- Active probe
- Medical instruments
- Scintillation detectors
- Signal transformation
- Non-polarized electrodes
- Strain gauges
- Thermocouples
- Professional videography
