AD8532AR-REEL

2 Channels 250mA per Channel 5pA 47 dB Instrumentational OP Amps 0.00006μA 2.7V~6V ±1.35V~3V AD8532 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8532AR-REEL
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 568
Description: 2 Channels 250mA per Channel 5pA 47 dB Instrumentational OP Amps 0.00006μA 2.7V~6V ±1.35V~3V AD8532 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Contact Plating	Lead, Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	3V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8532
Pin Count	8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Power Supplies	3/5V
Number of Channels	2
Operating Supply Current	2.5mA
Quiescent Current	1.25mA
Supply Current-Max	3.5mA
Slew Rate	5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	47 dB
Current - Input Bias	5pA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	250mA
Input Offset Voltage (Vos)	25mV
Gain Bandwidth Product	3MHz
Unity Gain BW-Nom	2200 kHz
Voltage Gain	98.06dB
Average Bias Current-Max (IIB)	0.00006μA
Power Supply Rejection Ratio (PSRR)	55dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Settling Time	1.4 μs
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Wideband	NO
Input Voltage Noise Density	45nV/sqrt Hz
Height Seated (Max)	1.75mm
Length	4.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

AD8532AR-REEL Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 3V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 25mV. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. You can run this op amp ic on 2.5mA . There should be no change in the voltage gain at 98.06dB. Buffer op amp is equipped with 2 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. Linear amplifier has a quiescent current of 1.25mA.