Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8534 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
5V |
Number of Channels |
4 |
Operating Supply Current |
5mA |
Quiescent Current |
1.25mA |
Supply Current-Max |
7mA |
Slew Rate |
5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
47 dB |
Current - Input Bias |
5pA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
250mA |
Input Offset Voltage (Vos) |
25mV |
Bandwidth |
3MHz |
Unity Gain BW-Nom |
2200 kHz |
Voltage Gain |
98.06dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Power Supply Rejection Ratio (PSRR) |
55dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7V |
Settling Time |
1.4 μs |
Low-Bias |
YES |
Bias Current-Max (IIB) @25C |
0.00005μA |
Input Voltage Noise Density |
45nV/sqrt Hz |
Height |
1.5mm |
Length |
8.75mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8534ARZ Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 14. In this case, there are 14 pins on the board. This linear amplifier should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 14-pin op amp ic is included in the package. Op amp rates 25mV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . An 5mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 98.06dB. As far as the device is concerned, buffer amplifier has 4 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The current is quiescent at 1.25mA.
AD8534ARZ Features
14 Pins
supply voltage of 3V
98.06dB voltage gain
Output Type: Rail-to-Rail
AD8534ARZ Applications
There are a lot of Analog Devices Inc. AD8534ARZ Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- MP3
- Precision measurement
- Image computer boards
- Car stereo
- Exponential operation circuits
- Television broadcasting equipment
- Medical instruments
- Polarized electrodes
- Proportional counter tubes