AD8538AUJZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8538 |
| Pin Count | 5 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 180μA |
| Quiescent Current | 180μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 150 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 13μV |
| Bandwidth | 430 kHz |
| Unity Gain BW-Nom | 430 kHz |
| Voltage Gain | 141dB |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 5μV |
| Settling Time | 10 μs |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Voltage Noise Density | 50nV/sqrt Hz |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8538AUJZ-REEL7 Overview
The linear amplifier is packaged in a SOT-23-5 Thin, TSOT-23-5 case. The instrumentation amplifier in this picture is of the Zero-Drift-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. A total of 5 pins are located on this board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 5 pins are available on the instrumentation amplifier. The input offset voltage is 13μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 180μA , this buffer op amp will be able to operate. Maintain 141dB as the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a result, linear amplifier's quiescent current is 180μA.
AD8538AUJZ-REEL7 Features
5 Pins
supply voltage of 5V
141dB voltage gain
AD8538AUJZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8538AUJZ-REEL7 Instrumentational OP Amps applications.
- Instrumentation
- Portable docking station
- Active probe
- MP3
- Band-pass filter
- Wireless base stations
- Vehicle electronics
- Portable media players
- Oscilloscopes
- Hand-held batteries
