AD8539ARZ
| Parameters | |
|---|---|
| Supply Current-Max | 0.43mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 15μV |
| Bandwidth | 430 kHz |
| Unity Gain BW-Nom | 430 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 5μV |
| Settling Time | 10 μs |
| Low-Bias | YES |
| Micropower | YES |
| Input Voltage Noise Density | 52nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8539 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 420μA |
| Quiescent Current | 210μA |
AD8539ARZ Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a Zero-Drift type op amp. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 15μV voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using a supply current of 420μA , this buffer op amp will be able to operate. There should be no change in the voltage gain. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of the buffer op amp is rated at 3V. 210μA quiescent currents are flowing through buffer op amp.
AD8539ARZ Features
8 Pins
supply voltage of 5V
130dB voltage gain
AD8539ARZ Applications
There are a lot of Analog Devices Inc. AD8539ARZ Instrumentational OP Amps applications.
- Polarized electrodes
- Displayers for aircraft and air transportation control systems
- High input resistance broadband
- MP3
- Computer workstations
- Power control
- Micro signal measurement
- Active probe
- High speed sample
- Thermocouples
