AD8539ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8539 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 420μA |
| Quiescent Current | 210μA |
| Supply Current-Max | 0.43mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 15μV |
| Gain Bandwidth Product | 430kHz |
| Unity Gain BW-Nom | 430 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 5μV |
| Settling Time | 10 μs |
| Low-Bias | YES |
| Micropower | YES |
| Input Voltage Noise Density | 52nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8539ARZ-REEL7 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 15μV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 420μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 130dB. The op amp ic has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 3V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. As a result, linear amplifier's quiescent current is 210μA.
AD8539ARZ-REEL7 Features
8 Pins
supply voltage of 5V
130dB voltage gain
AD8539ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8539ARZ-REEL7 Instrumentational OP Amps applications.
- Radar
- Cinema or auditorium audio system
- Portable media players
- single/dual op amp sum and difference circuits
- Medical instruments
- Weak signal detection
- Commercial audio systems
- Strain gauges
- Blood pressure sensors
- Scintillation detectors
