AD8541ARTZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8541 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 65μA |
| Quiescent Current | 65μA |
| Slew Rate | 0.92V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 45 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 980 kHz |
| Voltage Gain | 92.04dB |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1mV |
| Settling Time | 6 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 42nV/sqrt Hz |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8541ARTZ-REEL Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 5 mark. In total, there are 5 pins on this op amp ic. Please take in mind that op amp should be run at 3V. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 5 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 6mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using a supply current of 65μA , this buffer op amp will be able to operate. Op amp is a member of the 92.04dB's 92.04dB family. Instrumentation amplifier has 1 channels on it. On the output type, there are Rail-to-Rail different types of op amps. The instrumentation amplifier is packed in the form of TR. The current is quiescent at 65μA.
AD8541ARTZ-REEL Features
5 Pins
supply voltage of 3V
92.04dB voltage gain
Output Type: Rail-to-Rail
AD8541ARTZ-REEL Applications
There are a lot of Analog Devices Inc. AD8541ARTZ-REEL Instrumentational OP Amps applications.
- Power control
- Fast A/D and D/A converters
- Automatic control
- Cinema or auditorium audio system
- Inverse/same-phase proportional circuit
- E-book readers
- Laptop
- single/dual op amp sum and difference circuits
- Semiconductor detectors
- Proportional operation circuits
