AD8542ARMZ

2 Channels 30mA per Channel 4pA 45 dB Instrumentational OP Amps 0.001μA 5V 2.7V~5.5V AD8542 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8542ARMZ
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 828
Description: 2 Channels 30mA per Channel 4pA 45 dB Instrumentational OP Amps 0.001μA 5V 2.7V~5.5V AD8542 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8542
Pin Count	8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Channels	2
Operating Supply Current	130μA
Quiescent Current	65μA
Supply Current-Max	0.17mA
Slew Rate	0.92V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	45 dB
Current - Input Bias	4pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	6mV
Bandwidth	1MHz
Unity Gain BW-Nom	980 kHz
Voltage Gain	92.04dB
Average Bias Current-Max (IIB)	0.001μA
Power Supply Rejection Ratio (PSRR)	76dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	1mV
Settling Time	6 μs
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00006μA
Input Voltage Noise Density	42nV/sqrt Hz
Height	850μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8

AD8542ARMZ Overview

Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 3V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 8 pins. There is an input offset voltage of 6mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 130μA volt supply current is needed for this linear amplifier to operate. Op amp is a member of the 92.04dB's 92.04dB family. There are a total of 2 channels available on the op amps. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. TAPE AND REEL is adopted to pack the instrumentation amplifier. There is an 65μA quiescent current running through op amp ic.