AD8544ARZ-REEL7

4 Channels 30mA per Channel 4pA 45 dB Instrumentational OP Amps 0.001μA 5V 2.7V~5.5V AD8544 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8544ARZ-REEL7
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 850
Description: 4 Channels 30mA per Channel 4pA 45 dB Instrumentational OP Amps 0.001μA 5V 2.7V~5.5V AD8544 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8544
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Channels	4
Operating Supply Current	260μA
Output Current	30mA
Quiescent Current	65μA
Min Input Voltage	2.7V
Slew Rate	0.92V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	45 dB
Current - Input Bias	4pA
Max Input Voltage	5.5V
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	6mV
Gain Bandwidth Product	1MHz
Unity Gain BW-Nom	980 kHz
Voltage Gain	92.04dB
Average Bias Current-Max (IIB)	0.001μA
Power Supply Rejection Ratio (PSRR)	76dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	1mV
Settling Time	6 μs
Low-Bias	YES
Micropower	YES
Max Frequency	10kHz
Bias Current-Max (IIB) @25C	0.00006μA
Input Voltage Noise Density	42nV/sqrt Hz
Height	1.5mm
Length	8.75mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)

AD8544ARZ-REEL7 Overview

Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. Buffer amplifier has a total of 14 pins. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 14 pins are located on the operational amplifiers. Op amp rates 6mV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 260μA , this buffer op amp will be able to operate. There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a result, linear amplifier's quiescent current is 65μA.