AD8544WARZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8544 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2.7/5V |
| Operating Supply Current | 260μA |
| Quiescent Current | 65μA |
| Slew Rate | 0.92V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 45 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 980 kHz |
| Voltage Gain | 92.04dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1mV |
| Settling Time | 6 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Screening Level | AEC-Q100 |
| Input Voltage Noise Density | 42nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8544WARZ-RL Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 14 mark. It consists of a total of 14 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 14 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 6mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Operational amplifier can operate supply current at 260μA. There should be no change in the voltage gain at 92.04dB. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. This linear amplifier has a total of 4 elements. The instrumentation amplifier is packed in the form of TAPE AND REEL. As the name implies, Automotive refers to the series of the buffer op amp. The quiescent current is 65μA.
AD8544WARZ-RL Features
14 Pins
supply voltage of 3V
92.04dB voltage gain
Output Type: Rail-to-Rail
AD8544WARZ-RL Applications
There are a lot of Analog Devices Inc. AD8544WARZ-RL Instrumentational OP Amps applications.
- Subtraction operation circuits
- Wireless base stations
- Exponential operation circuits
- Communication
- Band-pass filter
- Video amplifiers
- Hand-held batteries
- Blood pressure sensors
- Tablets
- Ultrasound transducers
