AD8548ARZ
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8548 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.35/+-9/2.7/18V |
| Number of Channels | 4 |
| Operating Supply Current | 18μA |
| Supply Current-Max | 0.132mA |
| Slew Rate | 0.07V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~18V ±1.35V~9V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 240 kHz |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 235 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0026μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20.5V |
| Voltage - Input Offset | 4mV |
| Low-Bias | NO |
| Micropower | YES |
| Max Frequency | 10kHz |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Programmable Power | NO |
| Input Voltage Noise Density | 50nV/sqrt Hz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
AD8548ARZ Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. There have been a total of 14 terminations over the past year. Buffer amplifier has a total of 14 pins on it. Please take in mind that op amp should be run at 10V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 14 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 18μA . Voltage gain should remain at 120dB. Buffer op amp is equipped with 4 channels on the device. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer.
AD8548ARZ Features
14 Pins
supply voltage of 10V
120dB voltage gain
Output Type: Rail-to-Rail
AD8548ARZ Applications
There are a lot of Analog Devices Inc. AD8548ARZ Instrumentational OP Amps applications.
- Large motor controllers
- Radar
- Voltage regulation circuit
- Wireless base stations
- Strain gauges
- Exponential operation circuits
- Automatic control
- Digital cameras
- Precision measurement
- Cinema or auditorium audio system
