AD8552ARU
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8552 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 1.95mA |
| Max Supply Current | 1.95mA |
| Quiescent Current | 975μA |
| Slew Rate | 0.4V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 5μV |
| Gain Bandwidth Product | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 145dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Power Supply Rejection Ratio (PSRR) | 115dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.05mm |
| Length | 3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8552ARU Overview
There is a 8-TSSOP (0.173, 4.40mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the Zero-Drift type. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 5μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.95mA and 10 . Voltage gain should remain at 145dB. There are a total of 2 channels available on the op amps. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TAPE AND REEL. Currently, linear amplifier is operating with a quiescent current of 975μA.
AD8552ARU Features
8 Pins
supply voltage of 5V
145dB voltage gain
Output Type: Rail-to-Rail
AD8552ARU Applications
There are a lot of Analog Devices Inc. AD8552ARU Instrumentational OP Amps applications.
- Integrator circuits
- High-frequency data acquisition systems
- Large motor controllers
- Cinema or auditorium audio system
- High gain DC amplifier
- Portable docking station
- Precision measurement
- Semiconductor detectors
- Logarithmic operation circuits
- High/low-pass filter circuit
