AD8552ARUZ-REEL
| Parameters | |
|---|---|
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Wideband | NO |
| Length | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8552 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 1.95mA |
| Quiescent Current | 975μA |
| Slew Rate | 0.4V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 5μV |
| Gain Bandwidth Product | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 145dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Power Supply Rejection Ratio (PSRR) | 115dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1μV |
| Low-Bias | YES |
AD8552ARUZ-REEL Overview
The linear amplifier is packaged in a 8-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the Zero-Drift-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 8 pins. Op amp rates 5μV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 1.95mA, this op amp ic can operate. The voltage gain should stay at 145dB. There are a total of 2 channels available on the op amps. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. The current is quiescent at 975μA.
AD8552ARUZ-REEL Features
8 Pins
supply voltage of 5V
145dB voltage gain
Output Type: Rail-to-Rail
AD8552ARUZ-REEL Applications
There are a lot of Analog Devices Inc. AD8552ARUZ-REEL Instrumentational OP Amps applications.
- Scintillation detectors
- Power control
- single/dual op amp sum and difference circuits
- Wireless base stations
- Band-pass filter
- RF cable systems
- Communication
- High input resistance broadband
- Car stereo
- Video conversion and routing
