AD8553ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8553 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.1mA |
| Max Supply Current | 1.3mA |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 400pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 20μV |
| Gain Bandwidth Product | 1kHz |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 120μV |
| Dual Supply Voltage | 5.5V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8553ARMZ Overview
There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 10 terminations this year. In total, there are 10 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 10 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 20μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Using a supply current of 1.3mA , this buffer op amp will be able to operate. As far as the device is concerned, buffer amplifier has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
AD8553ARMZ Features
10 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
AD8553ARMZ Applications
There are a lot of Analog Devices Inc. AD8553ARMZ Instrumentational OP Amps applications.
- Test and measurement instruments
- Weak signal detection
- Band-pass filter
- Signal amplification
- Information processing
- Exponential operation circuits
- Power control
- Band-stop filter
- Broadcasting
- pH (acidity)
