AD8561AN
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD8561 |
| Pin Count | 8 |
| Output Type | CMOS, Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 6mA |
| Power Dissipation | 65mW |
| Max Supply Current | 6mA |
| Propagation Delay | 9.8 ns |
| Quiescent Current | 5.5mA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Input Offset Voltage (Vos) | 7mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 69.54dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Supply Voltage Limit-Max | 7V |
| Dual Supply Voltage | 3V |
| Input Bias Current | 3μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 6mA 3.3mA 5.5mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 65dB PSRR |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
AD8561AN Overview
The product is packaged in 8-DIP (0.300, 7.62mm) in order to facilitate transportation.The comparator has an output type of CMOS, Complementary, TTL .We ship the part through Tube .There are8 terminals on the comparator.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.The device is equipped with 8 pins.A Through Hole mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator is equipped with 8 pins.Alternatively, you may search for AD8561 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 5.5mA volts.Normal use of the device should require a nominal supply current of 6mA .If the current supply exceeds 6mA , the comparator might be damaged.Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5/+-5V power supplies.The voltage gain of the part is indicated by 69.54dB in the voltage formula.
AD8561AN Features
CMOS, Complementary, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5.5mA
Voltage Gain: 69.54dB
AD8561AN Applications
There are a lot of Analog Devices Inc. AD8561AN linear comparators applications.
- Security Detection Systems
- General-Purpose Portable Devices
- Infotainment and Clusters
- Factory automation & control
- Battery-Powered Electronics
- Current and voltage sensing
- Metering Systems
- Wearable Devices
- Limit Comparators
- Alarm and Monitoring Circuits
